The automatic dispensing machine with excellent performance has three-dimensional space function and programmable dispensing route. It can dispensing and spraying the product with a good automatic dispensing machine. It has a good effect on the coating of the product and can ensure no leakage of glue and wire drawing. However, before coating the products, it is noticed that these three dispensing details can significantly improve the coating effect of the automatic dispensing machine. Here are three points that should be paid attention to when using automatic dispensing machine by Baiqing Automation.
1. Attention should be paid to the quality of applicable glue
In addition to the correct selection of backdraft dispensing valve can improve the effect of automatic dispensing machine, the quality of glue used will also affect the dispensing effect, so users should check the overall quality of glue before using automatic dispensing machine to store glue for products. If there are too many impurities in the glue used, it is better to replace and use it, which can avoid the point. Probability of glue problems.
2. Pay attention to setting dispensing parameters < br />. Before dispensing products, dispensing paths and working parameters can be set by hand-held teaching device according to the actual needs of product stores. A hand-held dispenser is equipped in the automatic dispensing machine. When setting the working parameters, it is necessary to adjust the glue viscosity and the demand of the product for the amount of glue produced. At the same time, it is necessary to adjust the backdraft pressure of the backdraft dispensing valve so as to avoid the phenomenon of glue drawing affecting the glue coating effect of the automatic dispensing machine.
3. Pay attention to the selection of dispensing valve
Automatic dispensing machine is mainly used for dispensing and coating of products. This mode of operation can only be achieved by dispensing valve cooperation, so the selection of dispensing valve types is a very important detail. There are many kinds of dispensing valves that can be assembled by automatic dispensing machine. Besides spraying valves, the effect of glue coating can also be improved by assembling backdraft dispensing valves. The backdraft dispensing valve has good glue backdraft effect. Assembling the backdraft dispensing valve in the automatic dispensing machine can make the glue backdraft well and avoid the problems of dropping glue and leaking glue when the automatic dispensing machine is working.